164.68111.161: Understanding IP Address, Error, Code

The invalidity of 164.68111.161 as an IP address appears in the following ways: 164.68111.161 is an invalid IP address that violates the basic numeric and structural rules established concerning IPv4 and is not in the format of IPv6.

Because the specific reason of its invalidity is known, it is useful to have a better idea of how IP addressing is performed, and why the smallest numbers error may result in total network blockage.

Table of Contents

Know About The Arrangement Of IPv4 Addresses

A 32 bit number is known as an IPv4 address commonly presented in dotted decimal format consisting of four numbers followed by dots as in 192.168.0.1. These four numbers can be referred to as octet and have to be between 0 and 255.

The 0-255 range can be explained by geometry: every octet has 8 bits stored in it and 8 bits are enough to code numbers between 0 and 255. Any value that falls beyond this range cannot be represented in one octet and hence cannot be in an IPv4 valid address.

Why 164.68111.161 IP Address Breaks IPv4 Rules?

Looking at a 164.68111.161, it looks similar like an IPv4 address because it has three dots to divide a series of digits. Nonetheless, it has one of its segments that obviously goes against the permitted span of an octet.

An IPv4 address ought to be a valid 4 octet address; currently, the 164.68111.161 is only three octets long as it appears.

This middle part “68111” is much larger than 255, and, therefore, can not be an octet in IPv4 rules.

Although somebody might have attempted to decipher 164.68111.161 as some kind of hidden dot or typing error, any such interpretation that leaves 68111 as a single block of digits will not pass IPv4 validation.

The operating systems and routers networking stacks merely drop such values as invalid and will not give it as an envelope or forward traffic to it.

Main Reasons Why 164.68111.161 Is Not IPv6 Address

IPv6 has an entirely different format where hexadecimal numbers and colons are used instead of aSimple numbers and dots.
An average IPv6 address consists of pairs of hexadecimal characters with colons between them such as, 2001:0db8:85a3:8a2e:0370:7334.

Since 164.68111.161 is expressed in the format of decimal numbers with dots rather than with colons and hexadecimal numbers, 164.68111.161 is not IPv6.
Typically in IPv6, there is no processing that a dotted-decimal string such as this could be restored to an active IPv6 address without being converted or coded, which is not being done.

Why 164.68111.161 IP Fails Software Checks And Network Validations?

The current operating systems, networking libraries and devices are very strict during the validation of input of an IP address either in configuration or input during use.

Some of the validation normally includes:

Ensuring that the number of numeric components of IPv4 is four, and spaced by dots.
Making sure that each bit is a number, and it is between 0 and 255.
These basic checks of an address are that any attempt to make an address invalid.
Feeding such validation routines with 164.68111.161 gives parsing failure as the structure and numeric ranges are incorrect.
Consequently, the address can never be attached to a network interface, can never be added to a routing table, and cannot even be cited as a source or destination by IP packets.

Real Implications Of Why 164.68111.161 Is An Invalid IP

There are direct effects of configuration on connectivity using an invalid IP such as 164.68111.161.
Devices with an invalid address will be unable to communicate on that segment of the network as other devices will be unable to address the traffic to non-existing addresses.
The services which are attached to an invalid address cannot start correctly or will not accept a connection.
Poorly set up systems may result in puzzling error messages, time outs or overall downtime of the network until the address is fixed.
A single invalid IP address in a critical configuration (such as the address of a gateway or DNS server) may cause downtime across an entire department or application in the business or production environment.
That is why network administrators use automated tools and DHCP servers and ensure change controls to minimize the risk of typing or copying an inappropriate address.

Main Reason Why Similar 164.68111.161 IP Are On The Web?

Although invalid, 164.68111.161 has been used in articles and discussions as some sort of mystic number or example.

It is used by writers and educators to describe the way IP address validation processes operate, and the significance of familiarity with technical notation instead of the apparent significance of every possible dotted number as a real address.

The most important lesson conveyed here, regardless of context, is the same when a dotted number has a segment outside the range 0-255 or has the incorrect number of segments, it is not a valid IPv4 address; it may not be usable on the internet.

Summary Of Why 164.68111.161 Is Invalid

All added up, the figure 164.68111.161 is unsuccessful in many aspects:

It is not a four octet presentation; the normal IPv4 would have four segments.The middle part of it is 68111 and this is way above the range of 0-255 of any octet in IPv4. Its dotted-decimal format is non-colonic hexadecimal based IPv6 structure. PDV Standard networking software and protocols thus consider it malformed and decline to utilize it as an address.

It is due to these structural and numeric breaches that 164.68111.161 cannot be an actual IP address in any standard internet protocol implementation and correctly considered an invalid IP.

Also Know: 203.160.175.158:14001